Neway's custom MIM-9310 injection molded parts offer exceptional strength, durability, and precision, ideal for high-performance applications demanding excellence.

MIM-9310 Metal Injection Molding service

MIM-9310 is a low alloy steel renowned for its exceptional mechanical properties. MIM-9310 exhibits excellent strength, toughness, and wear resistance by combining iron, nickel, chromium, and molybdenum. Its low carbon content ensures good weldability while maintaining the alloy's high tensile and impact strength.

MIM-9310 is extensively employed in the automotive, aerospace, and machinery sectors, where precision and reliability are critical.

Its remarkable properties make it suitable for gears, shafts, and high-stress parts, delivering outstanding performance under demanding conditions. The Metal Injection Molding (MIM) process allows for the intricate and cost-effective production of complex shapes with MIM-9310. It is a versatile choice for applications where precision and durability are essential.


 Key Features and Applications of MIM-9310

Key Features


Excellent strength and toughness

Gears and gear components

High wear resistance

Shafts and fasteners

Low carbon content for weldability

Automotive components

Good machinability and formability

Aerospace parts

Versatile material for complex shapes

Firearms components

Cost-effective production through MIM

Medical and dental instruments

High tensile and impact strength

Industrial machinery components

Corrosion resistance in certain conditions

Oil and gas equipment components

Ideal for high-stress applications

Precision instruments and tooling components

MIM-9310 Low Alloy Steel Typical Properties

MIM-9310 Chemical Composition

Iron (Fe)

Nickel (Ni)

Chromium (Cr)

Molybdenum (Mo)

Carbon (C)

Silicon (Si)

Manganese (Mn)

Phosphorus (P)

Sulfur (S)










MIM-9310 Physics and Mechanical Properties


Tensile Strength (MPa)

Yield Strength (MPa)

Impact Strength (J)

Hardness (HRC)

Young's Modulus (GPa)

Poisson's Ratio

Elongation (%)

Density (g/cm³)

As Sintered

800 - 1000

650 - 800

40 - 60

28 - 35



8 - 15


Other Excellent Properties of MIM-9310


Wear Resistance

MIM-9310 parts are known for their impressive wear resistance. With a combination of alloying elements like nickel, chromium, and molybdenum, MIM-9310 exhibits exceptional resistance to wear, minimizing surface degradation even under demanding conditions. It is ideal for components subjected to high-stress, high-friction environments, ensuring prolonged service life and reduced maintenance costs.

Applications requiring wear resistance for MIM-9310 parts encompass gears and gear components in automotive and aerospace industries, bearings and bushings, cutting tools, and industrial machinery components. These components demand longevity and durability in the face of continuous wear, and MIM-9310's wear-resistant properties excel in meeting these requirements.

Corrosion Resistance

MIM-9310 parts exhibit moderate corrosion resistance depending on the specific alloy composition and heat treatment. While they may not be inherently corrosion-resistant like stainless steels, MIM-9310 can offer protection against mild corrosive environments, mainly when treated with appropriate coatings or surface finishes. It is suitable for applications where moderate corrosion resistance is sufficient and additional protection measures can be applied.

Applications requiring moderate corrosion resistance for MIM-9310 parts include specific automotive components, such as transmission parts and shafts, where exposure to atmospheric moisture and mild environmental corrosion may occur. Additionally, MIM-9310 can find use in machinery and equipment components where protection against corrosion is necessary but not the primary focus of the material.



MIM-9310 parts are distinguished by their impressive toughness, which measures their ability to absorb energy and resist fracture under impact or dynamic loading conditions. This toughness makes MIM-9310 well-suited for applications where components are subjected to sudden shocks, vibrations, or high-stress conditions. Its capacity to withstand impact without fracturing or deforming ensures reliable performance and component longevity.

Applications that demand high toughness for MIM-9310 parts include gears and shafts in automotive transmissions, where they must endure rapid gear changes and withstand shock loads. Aerospace components like landing gear also benefit from MIM-9310's toughness, ensuring safe and reliable operation under dynamic forces during takeoff and landing.

Dimensional Accuracy

MIM-9310 parts are renowned for their exceptional dimensional accuracy, a key attribute in precision engineering applications. The Metal Injection Molding (MIM) process allows for intricate and complex shapes with tight tolerances, ensuring that MIM-9310 components are manufactured to precise specifications.

Applications necessitating stringent dimensional accuracy for MIM-9310 parts include aerospace components such as intricate connectors and fasteners, automotive transmission and engine parts, and medical instruments like orthopedic implants and surgical tools. These applications demand components that adhere to precise measurements, ensuring the final products' seamless assembly and optimal functionality.


What We Can Do In Metal Injection Molding?

We can provide a one-stop service from prototyping to mass production for your custom injection molded parts. this includes

1. Consultive Design Service

2. Mechanical Design Service

3. Rapid Prototyping Service

4. On-Demand Manufacturing Service

5. Simple Assembly Service


Explore Related Blogs

Copyright © 2024 Neway Precision Works Ltd.All Rights Reserved.